1. Power on / off

Power is turned on automatically when the cover is opened. When the cover is closed, the power is turned off. When the power is turned on and there is no input for 20 minutes, it enters hibernation mode to save power. If any input is received in hibernation mode, it will return to active mode.

4. Mult-pairing and channel switching

• Repeat steps 2 and 3 with different channel keys.

• You can pair it with up to three devices.

• If you want to change the paired device, press the "fn" key and the corresponding "Channel key" shortly.

• The LED will blink for a short time (2-5 seconds) and then stop.

• Channel switching is complete.

5. Left handed / Right handed setting

• The initial setting is a right-handed setting.

​

• For left-handed setup,

  • hold down the "fn" key and press the "LEFT" keys in sequence.

  • Release all keys.

  • Of the four LEDs, the left two LEDs blink and turn off.

  • The left-handed setup is now complete.

  • It is convenient as it does not affect the touch input of the left hand even if the right hand is placed on the keyboard.

• For right-handed setup,

  • hold down the "fn" key and press the "RIGHT" keys in sequence.

  • Release all keys.

  • Of the four LEDs, the right two LEDs blink and turn off.

  • The right-handed setup is now complete.

  • It is convenient as it does not affect the touch input of the right hand even if the left hand is placed on the keyboard.

6. Dynamic Touch Area (DTA) solution

• When a touch input crosses the left or right boundary of the touch area, the touch area dynamically extends to the entire keyboard area.

7. Left click / Right click

• Left-click (single)

  • Press the red button in the center of the space bar once, or

  • Tap once on the touch area of the keyboard.

​​

• Left-click (double)

  • Double-quickly press the red button in the center of the space bar, or

  • Lightly tap the touch area of the keyboard twice quickly.

​​

• Right-click

  • Hold down the "Ctrl" key and press the "Red button" in the center of the spacebar once.

  • Lightly tap the touch area of the keyboard with two fingers once quickly.

8. Software update

• Version check 

  • Place the cursor on your smart device on the notepad. (Any application that can type is acceptable.)

  • Press and hold the "fn" key and press the "VER" ​keys in sequence.

  • Mokibo fusion keyboard will automatically type the current version information on the notepad on your smart device. 

​​

• Software update​

  • Send us your email in the form below and we'll let you know when a software update is available and how to do it.